Accessories, Placement of needle – Sears 1345 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ACCESSORIES!
Use KENMOf^e needles. The size of the
needle should conform with the size of the
thread and both should be suitable to the
fabric, Kenmore needles are color-coded by
size for your convenience (See chart on
next page}.
Never use a bent needle or one with a dull
point.
If you do not have a Kenmore needle, please
use this illustration to be sure your needle is
the right size. Distance from top of needle to
needlehole should be this exact length.
You
will
find
among
your
acce^ories
a
QNEEDLE", with blue shank. This special
needle is to be used when sewing knits and
certain
difficult
synthetic
fabrics.
If
you
experience skipped stitches in any of your
sewing, use "Q
needle
".,
and "Q
FOOT"..
PLACEMENT OF NEEDLE
Raise needle bar to its highest position by
turning the hand wheel toward you. Loosen
the needle clamp screw. Holding the needle
with the flat side away from you, slip the
needle into the needle bar. When it is in as far
as it will go, tighten the needle damp screw
with
small
screwdriver
provided
In
the
accessory box.
16