Casio PA-2400W - Manual (Page 73)

73
8.5 Details about Command and Option


The total number of characters must be 255 characters or less including "FCHKCE".


If at least one incorrect parameter, such as an incorrect description, an incorrect command, or an option
that is not permitted to make a specification to the command, exists, the file check utility is not initiated
but is terminated by the error.


Separate the parameters by inserting a space (1-byte) between two parameters.


The /G option or /C option should be placed immediately after "FCHKCE".


To specify multiple transmission source file names, separate the pathnames with a space (1-byte).
Examples of Correct Startup :
FCHKCE^/G^"\casio data\data1.dat"^"\casio data\data2.dat"^"d:\data\"^"\casio data\"
^ : Space code
FCHKCE^/G^/SC^"\casio data\fchkce.scr"^"\casio data\"
FCHKCE^/C^"\casio data\"
Example of Incorrect Startup (no /G or /C option):
FCHKCE "\casio data\data1.dat" "\casio data\data2.dat" "d:\data\" "\casio data\"


Uppercase and lowercase characters can be used for commands and options.


The order in which options other than /G or /C is specified does not matter.
Examples of specification for command and option:
FCHKCE /g /r /AO
FCHKCE /G /ao /R