Removing and replacing light bulb, To remove the light bulb, To replace the light bulb – SINGER 9134 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOVING AND REPLACING LIGHT BULB
CAUTION:
• Before changing light bulb, make sure you have removed plug from socket outlet.
Be sure to replace the face plate which covers the light bulb before operating
the machine.
• This machine is designed to use a 15-
watt maximum light bulb.
To change the light bulb, the face plate
must first be removed.
• Looser and remove screw (1).
• Slide face plate down and away from
machine.
TO REMOVE THE LIGHT BULB
• Push bulb up into socket (2) and turn to
the left to unlock bulb pins.
• Pull bulb down and out of socket.
TO REPLACE THE LIGHT BULB
• Push new bulb up into socket and turn
to the right until pins lock into position.
• Reposition face plate by sliding top edge
of plate under edge of top cover.
• Line up screw hole in plate with screw
hole in machine.
• Insert screw and tighten.
39