Vitek VT-4086 SR - Manual (Page 6)

ENGLISH
Connections
ConnecttoTVset and Dolby Digital 5.1CH Surround Sound System or Dolby Digital Acoustics
Please connect the home theater surround sound system and TV set according to the following diagram and instructions:
Connection terminal of TV SET
Note:
1. When connectingthe playertoTVset onlyselect one group from fivevideo groupsconnection.
2. Selectthecorresponding output mode ofTVsetand DVD player according tothevideo connection method.
1) AV
2) S-VIDEO
3) YUV
4) VGA
5) HDMI
Please refer to the TV set manual when connecting.
Dolby, “Pro Logic and double D marks are trademarks of
D o l b y L a b . P r o d u c t i o n authorized by Dolby Lab.
Confidential works notpermitted to issue. Dolby Lab 1992-1997. All rights reserved.
5.1CH output terminal connect to Active subwoofer
1. ConnectS.I channels( 6 channelstotally)oftheDVDanalogaudiooutputto theS.I channelinputportoftheactivesubwoofer.
2. Selectthe OFF option ofdownmix menu.
3. See the instruction manuals for active subwoofer at the same time.
• When connecting Power Amplifier via coaxial or optical cable, please select the “Spdif/Raw” of digital output.
• See instruction manual for power amplifier of Dolby digital at the same time.
• The standard configuration ofthe Dolby hometheater is5.1 channel loudspeaker replay. Ifyou have notconnected the middle and bass
loudspeakers, setthem at “OFF” mode with the loudspeaker setting function, their signal will be replayed bysuperposing on left/right tracks.
Remark: According your need, just select one group audio connection among 1,6,7,8,9, 10.
1. Before connecting, be sure to disconnect all equipment power supply.
2. All loudspeakers should be placed at the same distance to the audience.
3. Do not connect the coaxial output of the unit to the analog signal input port.
4. Do notturn on/offthe unitfrequently(the interval should be 10 secondsat least).