Caring for your gfa-5500, Warning, Servicing – Adcom GFA-5500 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CARING FOR YOUR GFA-5500

Great care has been taken by ADCOM to ensure that your amplifier is as flawless in appearance as it is electronically. The

front panel Is a heavy gauge, high-grade aluminum extrusion carefully finished and anodized for durability. The chassis, top

cover and rear panels are heavy gauge steel, that has been powder coated and baked to ensure a lasting finish. If the front
panel, top or sides become dusty or finger printed, they can be cleaned with a soft lint free cloth, slightly dampened with a very
mild detergent solution or glass cleaner.

WARNING!

Do not spray or pour liquids of any kind on the GFA-5500

SERVICING

ADCOM has a Technical Service Department to answer questions pertinent to the installation and operation of your unit. In
the event of difficulty, please contact us for prompt advice. If your problem cannot be resolved through our combined efforts,
we may refer you to an authorized repair agency, or authorize return of the unit to our factory. To aid us in directing you to a
convenient service center, it would be helpful if you indicate which major city is accessible to your home.

Please address mail inquires to:

Phone, Fax or E-mail inquires to:

ADCOM Service Corporation

10 Timber Lane
Marlboro, NJ 07746 USA

Tel.:

732-683-2356

Fax:

732-683-9790

Monday through Friday

9:00 AM to 5:00 PM EST
E-Mail: [email protected]

For Fax inquires, please include a return Fax number for the reply. When calling or writing about your GFA-5500, be sure to
note and refer to its serial number as well as the date of purchase and the dealer from whom it was purchased. It is helpful in

any communications to us, please include a daytime phone number where we may reach you. In the event the unit must be
returned to our factory for service, you will be instructed on the proper procedure when you call or write for a Return
Authorization. UNDER NO CIRCUMSTANCES SHOULD YOUR UNIT BE SHIPPED TO OUR FACTORY WITHOUT PRIOR
AUTHORIZATION, OR PACKED IN OTHER THAN ITS ORIGINAL CARTON AND FILLERS.

If the original shipping carton and its fillers have been lost, discarded, or damaged, a duplicate carton may be

obtained from our Service Department for a nominal charge.

Always ship PREPAID VIA UNITED PARCEL SERVICE (UPS) OR OTHER APPROVED CARRIER. DO NOT SHIP

VIA PARCEL POST, since the packing was not designed to withstand rough Parcel Post handling.

FREIGHT COLLECT SHIPMENTS WILL NOT BE ACCEPTED

UNDER ANY CIRCUMSTANCES.

8

Advertising