To display the talk time of the last call, To display the cumulative talk time, To display the number of calls – Audiovox TRAN-410A User Manual

Page 10: To clear the timer, One minute beep (nam option), Scratch-pad dialing, Scratch-pad dialing without keying tones, Call time display

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

5. Recall or dial the phone number to be called.

Press |RCL| , then enter the memory address (01

through 50) to recall the phone number to be

called.

1 1 ! 2 ! 3 1 4 1 5

6

7

8

g

o

6. Press |SND| . The IN USE | indicator will light as

the call is placed. Link 1 1 will appear on the

readout.

L

i

n

k

1

1 1 1 7 1 4 1 63

4

7

9

=

7. After you received an answer from the long dis­

tance service office, press [SN§ again. The DTMF

signal will be placed and the DTMF tone of your

ID number can be monitored through the

loudspeaker. | Link 2] will appear on the readout.

8. If your ID number is accepted, the long distance

service office will answer again, so press |SND|.

Then the long distance call will be placed and the

DTMF tone can be monitored through the

loudspeaker.

I

Link

3

] will appear on the readout.

SCRATCH-PAD DIALING

This feature permits you to enter a number to be

redialed (or store a number in memory ) while

engaged in a conversation.

SCRATCH-PAD DIALING

WITHOUT KEYING TONES

This feature permits you to acth'ate scratch-pad

memory without annoying key tones over the circuit.

1. Press iFUNCj , then key , then enter a phone

number. |

Tone

| will be displayed for 5 seconds.

The Microphone circuit will remain active, but

the tones will not be heard.

2. If necessary, press

|STO|

, then enter the memory

address.

3. To exit the Scratch-pad Mode, press |FUNC| ,then

key again or turn the unit off.

CALL TIME DISPLAY

This feature automatically records the elapsed time

per conversation. The talk time of the last call,

cumulative talk time, and the number of calls can be

displayed on the readout.

The timers can also be cleared if necessary.

With beep tones you can be notified of the approxi­

mate talk time (NAM Option) in approximately 60

second increments.

To Display the Talk Time of the Last Call

1. Press |RCL| , key then

¡T] .

The talk time of the last call will be displayed on

the readout for 5 seconds.

While in a conversation, the talk time of a call in

progress will be displayed, and updated each sec­

ond. The display format is as follows.

|01 m25|

-1 min. and 25 sec.

To Display the Cumulative Talk Time

1. Press [RCL|, key then

.

The cumulative talk time will be displayed on the

readout in minute format for 5 seconds.

I 1 Srrj •••18min.

To Display the Number of Calls

1. Press !RCy , key

M

then .

The number of calls will be displayed on the

readout for 5 seconds. The display format is as

follows.

I 86c

] •••Received or placed 86 calls

To Clear the Timer

then enter the three-digit security

Press |CLR|

code.

2. Press |STO| , key ^ then

[T] .

The timers will be cleared, and the count for the

cumulative talk time and the number of calls will

start from zero.

One Minute Beep (NAM Option)

During conversation, you can be notified of the

approximate talk time by tones for the first five

minutes (a short monotone signal will sound every

minute and a double beep tone will be heard after

approximately 5 minutes.)

18

19

Advertising