LELIT PL60 - Manual (Page 8)

Engh'sh
TROUBLESHOOTING:
We thank you for buying one of our products, projected and assem3ed in accordance Mth the most up-to date technoiogicai
innovations.
FoMowing carefuiiy the
smpe operations descritied in this manuai, which respect to ai essentiai safety reguiaions, you Mii
get the best performances and Wii appreciate the remarkabie reNabbity of this product in the years to come.
Piease find beiow the descrifstion of the most frequent probiems and of their soiution:
PROBLEM CAUSE SOLUTION
Coffee too coid 1. The machine had not reached the proper
temperature
2. Fiiter-hoider not preheated
3. Cups not preheated
4. Thermostat maifunctions.
1. See section "Starting the Machine" and
"Making an Espresso"
2. Fiiter-hoider must be heated together with the
water - see section "Starting the Machine"
3. Properiy heat the cups on the cup-warmer
(18)
4. Contact the nearest SERVICE CENTER
Coffee comes out too
quickiy 1. Too iittie coffee in the fiiter
2. Coffee not pressed enough
3. Coffee is oid or unsuitabie
1. Put more coffee in the fiiter
2. Press coffee more firmiy
3. Use a different coffee biend
Coffee ieaks between the
coffee group and the
fiiter-hoider
1. Fiiter-hoider not properiy inserted
2. Too much coffee in the fiiter
3. Edge of the fiiter-hoider not ciean
4. The douche seai is worn out or damaged
1. Insert the fiiter-hoider correctiy
2. Put iess coffee in the fiiter
3. Ciean the edge of the fiiter-hoider
4. Contact the nearest SERVICE CENTER
Coffee comes out in
drops 1. Too much coffee in the fiiter
2. Coffee too firmiy pressed
1. Put iess coffee in the fiiter
2. Press the coffee more gentiy
The machine does not
produce steam even if
the LED (6) and (9) are
on
1. Micro pump not functioning
2. Obstructed outiet hoie at end of steam pipe
3. Too iittie water in tank
1. See section "Steam"
2. Ciean the outiet hoie with a needie
3. See section "Starting the Machine"
The machine does not
work and the ON iight
does not turn on.
1. No eiectricity/power suppiy
2. The power cabie is not properiy piugged in.
3. The power cabie is damaged
1. Check and restore the eiectricai power
2. Piug in the power cabie correctiy
3. Contact the nearest SERVICE CENTER for a
repiacement cabie
ce
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2002/96/EC
At the end of its working iife, te product must not be disposed of as urban waste. It must be
taken to a speciai iocai authority differentiai waste cobection centre or to a deaier providing thii
service. Disposing of a househod appbance separateivi avoids possiloie negative consequences
for the environment and heaith deriving from inappropriate disposai of enabies the consfituent
maeriais to be recovered to obtan significant savings in energy and resources. As a remainder
of the need
to dispose of househoid appbances separaei'y, the products is marked wth a
crossed-out wheeied dustbin.
EC DECLARATION OF CONFORMITY
Gemme laban Producers si deciares under its own responsib^Mity that the product PL60, to
which this deciaration reiaes, is in accordance wt the provisions of the specific directives:
CEI EN 60335-1, CEI EN 60335-2-15
It aiso deciares that the above mentioned product conforms wth the
eectromagnaic
compatibbity test EMC.
NB: The present deciaraion voids shouid the machine be modified wthout our specific
authorization.
Castegnato, 01/07/2011
Amministratore Deiegao