DLO iBoom JukeBox - Manual (Page 6)

| 11
About
The About setting is mainly used for informational purposes, but should you have a
problem with your Display Remote communicating with the iBoom JukeBox base
unit, you can pair the Display Remote with iBoom JukeBox as follows:
1. Ensure that there is no iPod connected.
2. With the iBoom JukeBox on, hold the Power Button down for 5 seconds to
enter “Pairing Mode.” You will know you’re in Pairing Mode when the iBoom
JukeBox touch panel flashes in blue.
3. On the Display Remote, navigate to “About” in the Settings Menu. Press the
Next Menu/Select Button to tell the Display Remote to pair with iBoom
JukeBox. The iBoom JukeBox base unit will acknowledge by a quick flashing
of the touch panel in white.
4. Once the Display Remote is paired, you will see a “no iPod” message on the
display screen.
10 | IBOOM JUKEBOX USER MANUAL
Settings + Features
Settings Menu
The Display Remote features a simple Settings Menu with the following options:
Sleep
In the Sleep Menu, you can set the amount of time it will take the Display Remote to
enter Sleep Mode. To change the time, navigate to “Sleep” in the Settings Menu and
press the Next Menu/Select Button. Use the Menu Line Item Up or Down Button to high-
light the desired time setting, and press the Next Menu/Select Button to select your
highlighted option. You may choose from: 30 sec, 1 min, 2 min, or 4 min.
Language
The Language Menu is used to configure the Display Remote for a specific language. To
change the language selection, use the Menu Line Item Up or Down Button to highlight
the desired language, and press the Next Menu/Select Button to select your highlighted
option. iBoom JukeBox supports English, Spanish, Italian, French, German, Dutch,
Korean, Simplified Chinese, Traditional Chinese and Japanese.