Dakota Digital LED Tail Lights for 1968 Chevelle LAT-NR180 - Manual

MAN#650179
INSTALLATION INSTRUCTIONS
LAT-NR180
LED Tail Lights for 1968 Chevelle
MAN#650179
Kit Includes:
Installation:
1. Remove the chrome tail light cover. There are four nuts on the back of the housing.
2. Remove the tail light lens.
3. Remove the light bulb.
4. Remove the original bulb connector from the back side of the housing.
5. Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is
recommended.
6. Remove the nuts and back plate from the back of the new LED assembly.
7. Insert the new LED assembly into the hole where the original bulb
and connector were located. Use caution when feeding the wires
through the socket opening to avoid damaging the wire insulation.