Directed Electronics Automate 552 - Manual (Page 34)

34 © 1999 Directed Electronics, Inc. Vista, CA
t
The learn routine will be exited if:
■ The ignition is turned on.
■ The Valet/Program switch is pressed too many times.
■ More than 15 seconds elapses between programming steps.
One long horn honk (if connected) indicates that the Learn Routine has been exited.
feature menus
FEATURE DEFAULT - LED ON SETTING LED OFF SETTING
NUMBER (PRESS CHANNEL 1) (PRESS CHANNEL 2)
1-1 Active arming Passive arming
1-2 Chirps on Chirps off
1-3 Ignition controlled door locks on Ignition controlled door locks off
1-4 Active locking Passive locking
1-5 0.8 second door lock pulses 3.5 second door lock pulses
1-6 Double pulse unlock off Double pulse unlock on
1-7 Channel 2 output - Delayed (1)* Channel 2 output - Instant validity (2)/
latched (3)/latched reset with ignition
(4)/30-second timed (5)/second unlock (6)*
1-8 Factory alarm disarm with Channel 2 on Factory alarm disarm with Channel 2 off
1-9 Code Hopping™ on Code Hopping™ off
*NOTE: The numbers in parentheses indicate the number of times the LED will flash.
menu #1
to exit the learn routine