Deltech Fitness DF838- Stack Loaded Lat Attachment - Manual (Page 12)

WEIGHT STACK ASSEMBLY
INSTALL THE RUBBER DOUGHNUTS (EE) ONTO THE BOTTOM OF THE CHROME RODS (GG) ,
LEAVING APPROXIMATELY 2” PROTRUDING. INSERT THE CHROME RODS INTO THE TWO
OUTER HOLES IN THE BOTTOM SUPPORT.
ASSEMBLE THE WEIGHT STACK (CC) BY SLIDING EACH PLATE OVER THE CHROME RODS (J)
AND ON TO THE BOTTOM SUPPORT.
SLIDE THE SELECTOR ROD/TOP PLATE ASSEMBLY (DD) OVER THE CHROME RODS (GG) AND
THROUGH THE WEIGHT STACK (CC). INSERT THE WEIGHT STACK ADJUSTMENT PIN (FF) INTO
THE WEIGHT STACK (CC).
DD
FF
CC
GG
EE