Dacor AOCTK27 - Manual (Page 3)

3
Figure 4 Figure 5
Figure 6
Figure 7
STEP 3 CORD BOX
1. Plug the oven electrical cord into the CORD BOX
RECEPTACLE and roll the remaining part of the cord into
the CORD BOX as shown in Figure 6-A.
2. Remove screw #2 from lower left rear of the oven. Insert
right fl ange of the CORD BOX into hold lip of the oven.
Using the screw #2 just removed from the oven, secure
the CORD BOX to the oven. See Figure 6.
STEP 4 INSTALLATION
1. Place oven on bottom duct and slide assembly partially
into cutout, leaving room to reach in and connect the cord
to the electrical outlet.
2. Slide the oven into place. Be sure the oven is placed at
the center of the opening.
SCREW-A
SCREW-A
DUCT-A3
DUCT-A2
SCREW-A
SCREW-A
DUCT-A2
DUCT-A1 DUCT-A1
SCREW-A
SCREWS
BOTTOM
PLATE
CUSHION-B
CORD BOX
CUSHION-A
#2
6-A