GoDEX EZ Viewer - Manual (Page 11)

2-7. Print Serial and Variable Number Label with Keyboard
1. Please refer to section 2-3 Ε 2-4
for information on the printer
and the EZ-Viewer connection,
then start-up the printer.
2. Download the label to the
printer first (please refer to the
appendix 2 for download
instructions), then the LCD
would display the messages
shown on the right.
3. When download is successful,
the EZ-Viewer will beep once,
and then go back to standby
mode.
4. Press the F1 key on the PS2
keyboard to enter the keyboard
mode and press the Y key to
enter “Recall Label”.
5. Press the Enter key to enter,
the LCD display would show
the label name which is
downloaded onto the printer.
Press Enter to confirm the file
selection.
Note: Press Feed key of the
EZ-Viewer to select the
previous or the next label
format.
6. LCD display will show the
Serial Number Prompt.
7. Key in the start value.
(Example: 00001) and then
press Enter to keep on setting.
GODEX
Data receiving…
GODEX
EZ-1X00 VX.XXX
Ready to print
GODEX
Recall Label
Keyboard Setup
GODEX
Enter Keyboard
Mode ? [ y/n ]
GODEX
001 FORM NAME:
TEST1
GODEX
Serial Number
00001_
10