Hatteland Display 13 inch - HD 13T21 MMC (Widescreen, Inte Cor2 Duo CPU) - Manual (Page 26)

Physical Connections
26
IND100133-46
Note: For connectivity, please review “Housing / Terminal Block Connector Overview“ and “Pinout Assignments”
sections in this manual. For Application Programming Interface (API) usage and Detailed IO Specifications/Circuits,
please review the appendix chapters in this manual.
DIGITAL OUPUT (X1 DIG OUT) (Optional):
This is a standard change over relay contact which can be programmed by the user application. Connect and fasten
your cables from your compatible external equipment to the 5-pin Terminal Block 3.81 connector.
Signal Description : See "Detailed IO Specification" appendix chapter later in this manual.
DIGITAL OUTPUT / INPUT: (X1 DIG OUT / X1 DIG IN):
A mechanical and digitally driven “Solid State Relay” (NO/NC/COM/24VDC) (over current protection) which allows the
user via software to control external equipment that require or are compatible with the specifications. Connect and
fasten your cables from your compatible external equipment to the 4-pin Terminal Block 3.81 connector.
Signal Description : See "Detailed IO Specification" appendix chapter later in this manual.
DIGITAL OUTPUT / SERIAL I/O: (X1 DIG OUT / X7 SER I/O):
A two-function connector. Digital output is a standard change over relay contact which can be programmed by the user
application. This relay is sharing connector with the RS-422/RS-485 port which is a COM (isolated RS-422/485)
functionality to communicate with serial based equipment. Connect and fasten your cables from your compatible
external equipment to the 5-pin Terminal Block 3.81 connectors.
Signal Description : See "Detailed IO Specification" appendix chapter later in this manual.
DVI-I or RGB / VGA OUT:
Enables a direct clone signal output from the computer. You may choose to use a DVI-I 29P cable directly or use a
DVI-I -> RGB adapter to use a RGB/VGA HD D-SUB 15P instead for this purpose. Connect the cable to the Connector
(female) and secure it to the hex spacers provided on the unit. Connect the other end to your equipment and secure it.
Available on the 13 inch unit (with Intel® Core™2 Duo CPU) only.