Laerdal LGH Upright Bag-Mask - Manual

User Guide
Accessories and Spare parts Important Product Information
User Guide
Cat .no Description
846156
846157
846151
846131
846155
Intended Use
Upright Newborn Bag-Mask (”Upright”) is a self-inflating,
manual, reusable resuscitator intended for newborns and
infants up to 10 kg body mass who require respiratory
support.
Upright can provide supplemental oxygen only when
used with the accessory Oxygen kit.
Upright may be reused provided reprocessing
procedures (page 2) are followed between each patient
use. It must be cleaned and disinfected before first use.
Using Upright
Orientation: Upright is operated as a normal resuscitator,
with the bag having a vertical stance over the mask.
Newborn Mask - Snap design: The mask fits with
standard 15 mm inner-diameter conical connectors, as
defined by ISO 5356-1. Check fit before use with other
devices. When used with Upright, the mask attaches with
a snap fit when pressed completely into place.
Pressure release valve: Upright has a pressure release
valve (“pop-off ”) which limits the airway pressure to
30-45 cmH
2
O. A hissing sound can be heard when the
valve opens. If higher airway pressure is needed, press
downwards on the valve with the index finger while
squeezing the bag.
Vomitus: If the patient valve becomes contaminated
with vomitus, clear the valve by shaking Upright and
forcefully squeezing the bag to expel the vomitus. If it
does not clear, disassemble the patient valve (see page
2), rinse it in water and then reassemble it.
If any components are loose, tighten or reassemble
the device and test in accordance with page 2.
Warnings
Upright should only be used by persons who have
received sufficient training in its use. Incorrect
operation of the Upright can be hazardous.
Do not use Upright if you have any reason to be
concerned about its functionality.
For proper function, ensure that Upright components
are not mixed and confused with similar-looking
non-Laerdal components. All Upright components are
marked LAERDAL, as shown on page 2.
Regulatory
0434
This product is in compliance with the essential
requirements of Council Directive 93/42/EEC as
ammended by Council Directive 2007/47/EC.
Technical Information
Meets ISO 10651-4:2002/EN ISO 10651-4:2009,
Lung ventilators – Particular requirements for
operator–powered resuscitators.
Newborn Mask - Snap design, is not designed in
accordance with ISO 5356-1:2004 - Anaesthetic and
respiratory equipment - Conical connectors - Part 1:
Cones and sockets.
REF Cat.no. 846050 QTY 1 each
Page 1
Newborn Mask - Snap design – Size 0*
Newborn Mask - Snap design – Size 1*
* 10 pcs
Oxygen kit (Complete) includes Oxygen
adaptor, Valve, Reservoir Bag and Tubing
Oxygen Reservoir Bag and Tubing
Upright Valve s and Membranes kit*
(Lip valve, Inlet valve disc membrane)
Upright
NEWBORN BAG - MASK
REUSABLE - AUTOCLAVABLE
15 mm
Operating t emperature
Storage t emperature
Expiratory resistance
Inspiratory resistance
Tidal volume
Dead space
External dimensions
(with Newborn Mask size 1)
Mass
(with Newborn Mask size 1)
-18 °C to 50 °C
-40 °C to 60 °C
<2.5 cm H
2
O at 5 LPM
<0.5 cm H
2
O at 5 LPM
>150 ml
4 ml (water volume)
Approximately
72 mm x 85 mm x 217 mm
Approximately
190 grams
Manufacturer Information
Global Warranty: See www.laerdal.com
Manufactured in China for :
Laerdal Medical AS, Tanke Svilandsgate 30
P.O. Box 377, 4002 Stavanger, Norway
Tel : +47 51 51 17 00
Fax: +47 51 52 35 57
Email: [email protected]
Pending US and international design registration.
Laerdal® is a trademark or registered trademark
of Laerdal Medical AS.
© 2014 Laerdal Medical AS, All rights reserved.
20-06867 Rev B
Includes
Newborn Mask
(Snap design)
Size 0 and Size 1
* 10 pcs
Upright Oxygen kit
(Complete)
Materials
Hard plastic components: Polysulfone (PSU)
Soft plastic components: Silicone rubber
Spring: Stainless steel
Not made with natural rubber latex.