Laerdal VitalsBridge - Manual (Page 19)

VitalsBridge Directions for Use
18
rev. B.7 PN 10229
Caution: Ensure CO
2
has been fully released prior to disposing of the cartridge. This may be
accomplished by: (i) turning the regulator to “OFF”, (ii) detaching the female luer fitting from
the blue luer lock ring on the VitalsBridge, (iii) slowly turning the regulator knob clockwise
(towards “HI”), and (iv) allowing the remaining compressed CO
2
gas to expel in a controlled
manner. The CO
2
cartridge may be very cold. Point the outlet of the cartridge away from
yourself and others. Wear eye protection. Ensure that the knob is turned to the off position
before a new cartridge is installed.
Caution: When not in use turn the CO
2
to the off position and disconnect the CO
2
line from the
VitalsBridge.
Warning: CO
2
cartridges may become extremely cold when discharging. Protect eyes and hands
when installing and handling CO
2
handling CO
2
cartridges.
Warning: Mishandled CO
2
cartridges may become a projectile.
Caution: CO
2
cartridges may not be transported by air.
(5) (6) (7)