Lingenfelter L250280197 Lingenfelter C5 Corvette E-Force Supercharger Install Kit v2.9 - Manual (Page 83)

Page 82
290. If your new hood accepts the OEM hood
light, transfer it over from the OEM hood to the
new hood and install the aftermarket hood on to
the vehicle.
291. This kit requires custom calibration. If
the vehicle’s engine was completely stock prior
to installing this kit, the correct calibration may
be obtained through LPE. If there are any
modifications to the vehicle in addition to the
installation of this supercharger kit, custom
calibration will be required. Take the vehicle to
your local performance shop to have it calibrated
correctly.
292. Turn the ignition key to the on position.
Using the programmer, connect the connector
into the OBDII connector on the vehicle located
under the driver side dashboard. Upload the
software to the vehicle through the programmer.
293. OPTIONAL STEP: Install the LPE
diagnostic port cover kit (PN: L450110095)
to protect the vehicle from being accidentally
reprogrammed.