Lingenfelter L650172012 Lingenfelter Camaro ZL1 Air Intake Duct 2012 v1.1 - Manual (Page 5)

Page
7. Using silicone lubricant and a hook tool,
slide the 4” hump hose onto the air duct, and
then onto the throttle body. Make sure that the
hump hose adequately engages the duct and
airbox so that they can be secured using worm
clamps.
CAUTION: Silicone lubricant should be used
sparingly. Avoid spraying silicone lubricant in
close proximity of any sensor.
8. Clock the hump hose so that the breather
is roughly at 3 o’clock, as shown in the adjacent
illustration.
4.
9. Secure the two hoses and air duct by
installing the four (4) supplied hose clamps.
Position the hose clamps as shown in the
adjacent illustration.
10. Install the supplied 45 degree nipple
connector into the breather hose. The nipple
connector should be pointed straight up with
respect to the hump hose breather.