Q-See QSW1001R - Manual (Page 13)

13
Exit setup
Press MENU to exit directly.
Motion Detection Interval
Motion detection interval means that you can set 1, 3, or 5 second
intervals between two motion detection events.
(1) Press MENU to enter system main menu.
(2) Press LEFT/RIGHT to setup option,and then press OK to
confirm.
(3) Press LEFT/RIGHT to motion detect interval setup option,and at the
bottom of the screen shows the current interval
(4) Press OK to switch time.
(5) Press LEFT/RIGHT to exit the option,and then press OK to return
to the setup.