Starrett Electronic Digital Micrometer - Manual (Page 2)

2
2. Accuracy is ±.0001 or ± 0.003
mm in the 0-1" (0-25 mm)
range and as good as setting
to a gage above that because
the mechanical and electronic
components are the same in all
ranges.
Installation of Battery
Install the battery that comes
with the instrument. See “Battery
Replacement”.
OPERATING INSTRUCTIONS
Automatic OFF
The micrometer will turn off (the
display will go blank) after 30
minutes of no spindle movement.
Any movement of the spindle will
activate the display with no loss of
position reading.
HOLD Button
One button push will freeze the
display and the word “HOLD” will
appear. A second push will update
the display to the current position
reading.
SHIFT/SET Button
This is the button that gives great
versatility to this tool. One push of
this button will change the function
of this button to SET — it will change
the function of the ZERO/ABS button
to PRESET, and it will change the
function of the IN/mm button to
LIMITS.
23
NOTES