Taser X26 - Manual (Page 10)

10 Chapter 3 Features
Central Information Display (CID)
The CID is a two-digit display on the back of the X26 ECD that provides the following information:
Spark Duration
When the X26 ECD is discharged, it delivers an approximately 5-second Shaped Pulse energy burst. The CID
displays a countdown from 5 to 0 (in the following sequence for software versions 20 or higher: 05, 04, 03, 02,
1111, 00) indicating how many seconds remain in the current burst. If the trigger is held down longer than 5
seconds, the CID will continue to display a "0" for the remainder of the energy burst. The burst can be stopped
at any time during the automatic 5-second cycle by shifting the safety switch to the down (SAFE) position.
DPM Power Level (Energy Cell Indicator)
The estimated remaining battery capacity is displayed as a percentage.
X26 Status Data
When a DPM is inserted in the X26 ECD, the ECD will enter a “boot-up” sequence and cycle through the following
information:
Example:
00
00
00
07 Current year (2007)
08 Current month (August)