Vortech 1997-2003 Ford 5.4 F-150/Expedition - Manual (Page 5)

P/N: 8N020-130
© 2005 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
19SEP05 v1.0 97-03F150PwrClr(8N020-130v1.0)
v
Vortech Maxflow Power Cooler ©
Installation Instructions
1997-2003 5.4L F-150/Expedition
Before beginning this installation,
please read through this entire instruction booklet
The Vortech Maxflow Power Cooler system was designed as a street/strip ori-
ented aftercooler, specifically for use on 1997-2003 5.4L F-150/Expedition
vehicles equipped with a Vortech supercharger.
As with any power enhancing product, this system is intended for use on
healthy, well-maintained engines. Vortech Engineering is not responsible for
engine damage. Installation on new vehicles will not harm or adversely affect
the break-in period so long as factory break-in procedures are followed.
For best performance and continued durability, please take a note of the following key points:
1. Use only premium grade fuel 91 octane or higher (R+M/2).
2. Always listen for any sign of detonation (pinging) and discontinue hard use (no
boost) until problem is resolved.
TOOL & SUPPLY REQUIREMENTS:
• Metric and standard - socket set, wrench set
• Ratchets - 1/2", 3/8", 1/4" drive
• Extensions: 3" & 6"
• 1/2" drive breaker bar
• Pliers
• Drill motor
• Ø1/16" and #30, Ø9/32", and Ø11/16" drill bits
• Test light
• Wire cutters and crimping tool
• Standard hex key set (Allen wrenches)
• Silicone sealer/RTV
Congratulations on selecting the best performing and most
efficient aftercooler today... the Vortech Maxflow Power Cooler!
If your vehicle has in excess of 30,000 miles since its last spark plug change, then you will also need:
• Spark Plug Socket
• NEW Spark Plugs