Vortech 2005-2009 Ford 4.6L 3V Mustang GT User Manual
Page 27
P/N: 8N020-120
© 2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23SEPT08v3.0(8N..120v3.0)MaxflowPwrClr
17
3C. ENGINE COOLANT RESERVOIR INSTALLATION (2005-2006 MODELS ONLY)
Fig. 3C-a
1.
Locate assembly 8N155-080.
2.
Attach the rear reservoir mounting bracket
4FU010-051 to the reservoir with the 1/4-20 x 1/2"
long bolts and washers provided. (See Fig.
3C-a.)
3.
Attach bracket 4FU010-061 to the front of the res-
ervoir with the hardware provided. (See Fig.
3C-b.)
4.
Locate and install 1/4"NPT x 3/8" barbed fitting in
the tapped hole just above the previously installed
mounting bracket. This hole may have to be
opened using the appropriate drill bit. (See Fig.
3C-c.)
Fig. 3C-b
Fig. 3C-c
NOTE: For 2007-2008 models skip to Section 3.E.