Vortech 1996-2004 Ford 4.6L Mustang GT - Manual (Page 19)

P/N: 8N020-030
© 2002 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured.
23JAN00 V2.1 (2V Maxflow Power Cooler.qxd)
11
9. FMU Mounting
(1996-1998 Models Only)
A. Install the new 30” long male FMU line to the fuel
rail and to the FMU.
B. Remount the FMU next to the air inlet (see Figure
9-a).
C. Connect the supplied length of 5/32” vacuum hose
to the FMU and the original manifold vacuum
source.
D. Route the 5/32” vacuum line from the bypass valve
and TEE into the FMU vacuum line with the origi-
nal 5/32” TEE. Make sure vacuum line to bypass
valve is not kinked.
Figure 9-a