09 maintenance and specifications, Replacing bulbs – Volvo 2013 XC70 User Manual
Page 337
09 Maintenance and specifications
Replacing bulbs
09
335
2.
Remove the insulation by pulling it straight
out.
3.
Remove the entire bulb unit by turning its
handle counterclockwise.
4.
Remove the bulb by pulling it straight out.
Replace the bulb in the reverse order.
License plate lighting
G017458
1.
Remove the screws with a screwdriver.
2.
Carefully detach the entire bulb housing
and pull it out.
3.
Replace the bulb.
4.
Reinsert the entire bulb housing and
tighten the screws.
Cargo area lighting
G031942
NOTE
Before starting to replace a bulb, see
page 330.
1.
Insert a screwdriver and gently turn so that
the bulb housing comes loose.
2.
Replace the bulb.
3.
Check that the bulb illuminates and press
it back into the bulb housing.
Vanity mirror lighting
Removing the mirror glass
1.
Insert a flat screwdriver under the glass
and carefully exert upward pressure to
release the retaining lugs.
2.
Snap out the lens.
3.
Use needle nose pliers to pull the bulb
straight to the side. Replace the bulb. Do
not exert too much pressure on the bulb
with the pliers to help avoid damaging it.
Reinstalling the mirror glass
1.
Put the lens back into position.
2.
Press it into place.