Lenco Xemio-767BT - Manual (Page 3)

3
the warning and enter/continue into the volume control for
increase the level and until to maximum level.
4. Bluetooth Audio Transmission
To Turn On the Bluetooth Function:
 From main menu, choose Bluetooth menu by using
/
and buttons, a Bluetooth list menu appear to choose;
To Search and Pair Bluetooth receiver device:
 Before pairing, please make sure your Bluetooth Receiver
Device supports Bluetooth A2DP profile.
 Keep the device in 1 meter of your Bluetooth receiver device.
Power “On” your Bluetooth receiver device and enable it into
searching / pairing mode;
 Then, in the Bluetooth list menu choose “Search Device” by
using / and buttons, the device searching mode is
starting, for approximately 10 ~ 20 seconds, a found device’s
name list will appear to choose for pairing.
 Choose your wanted “Device Name” in list > choose “Pair /
connect” by using / and button, wait for few
seconds both device should be paired and the first song in
music list will play automatically from your Bluetooth receiver
device. The screen is switch back to BT now playing screen
and a Bluetooth icon “ “is displaying at the information bar.
The Bluetooth is in transmitting.
 Choose “All Music” in list to direct select the wanted music for
play and transmitting.
 Choose “BT Now Playing” to return now playing interface.
And you can selects Previous / Next, Play / Pause and adjust
Volume Up/Down function by using the
/ , and /
buttons.
 To exit the Bluetooth Transmission function, pressing