Subaru 2004 Legacy - Manual (Page 216)

5-15
Audio
– CONTINUED –
T To start playback
Press the “CD” button (16). The “CD” indicator will
come on and the disc number will appear on the dis-
play and the CD changer will start playback.
NOTE
y If the “CD” button is pressed during a radio
broadcast, the CD changer will interrupt the
broadcast.
y
At the end of the disc, playback automatically
continues with the next disc.
y
After playback on the last disc finishes, the play-
er will automatically return to the first disc.
y
If you have loaded fewer than 6 discs, any miss-
ing disc is automatically skipped.
T Selection of a desired disc
Discs cannot be selected using the main audio unit. To
select a disc, press one of the “Disc select” buttons
(these are numbered from 1 to 6) on the CD changer
unit. The disc will begin to play.
T To select a song from its beginning
Briefly press the “
” button (17) to skip to the be-
ginning of the next track and briefly press the “ ”
button to skip to the beginning of the current track.
T Fast-forwarding and fast-reverse
Press the “
” button (17) continuously for more
than a half second to fast-forward the disc.
Press the “ ” button continuously for more than a
half second to fast reverse the disc.
Release the button to stop fast forwarding or fast re-
verse.
T Repeat
Press the “RPT” button (19) while a song is playing to
play the song repeatedly. The “RPT” indicator will
come on and the song will be played continuously. To
cancel the repeat mode, press the button again. Then
the “RPT” indicator goes out, and normal playback
mode is restored.
T Random playback
Press the “RAND” button (18) while a disc is being
played back to play all songs on the disc in a random
order. The “RAND” indicator will come on and all
songs on the disc will be played in a random order.
To cancel the random mode, press the button again.
Then the “RAND” indicator goes out, and normal play-
back mode is restored.
T Scan (a convenient way to become familiar with
a disc)
1. Press the “SCAN” button (20).