MIPRO mr801(2ce126)a2 - Manual (Page 9)

1. AF Input Jack:Connects to either lavaliere or headset microphone.
(See 5 ways ofconnection on AF Input Connections)
2. Power Switch: Switch to ON position for operation. Switch to OFF
position when not in use.
3. Battery Status Indicator: Indicates the power on / off and battery
status.
(a) Whenpower switch is turned on: TheLED indicator flashes
briefly, indicating normal battery status.
(b) When R E D l i g h t illuminates at either power on or during usage:
The battery level is low, therefore, a new battery replacement is thus
necessary.
4. Transmitting Antenna: 1/ 4 transmitting antenna.
5. Transmitter Housing: Packages the PCB and battery.
6. Unused Status Indicator: When LED lights o n , it denotes un-
transmitted signals.
7. Gain Control: Adjusts the desirous input gain.
8. GT/MT Level Select Switch:Switch GT position for electric guitar
usage O NLY. Gain Control is irrelevant for "GT". Switch to "MT" for
condenser microphone, wired microphone. Gain Control works in
"MT" for input sensitivity adjusting.
λ
(Fig.1)
- 1 5 - - 1 6 -
1
2
3
5
6
9
10
8
7
4
(XLR JACK)
BELT PACK TRANSMITTER
1. Parts Name And Functions
3. AF 4-Pin Input Connection Method
4PIN
PLUG
2 3 1 4
SHIELD
AUDIO
1
3
4
2
PIN
(1) 2-Wire Electret condenser microphone Capsule
4PIN
PLUG
2 3 1 4
SHIELD
AUDIO
BIAS
3
4
PIN
1
2
(2) 3-Wire Electret condenser microphone Capsule
4PIN
PLUG
2 3 1 4
SHIELD
AUDIO
3
2 1
PIN
4
3
2
1
(3) Dynamic Microphone
AUDIO
SHIELD
4
3
2
1
PIN
4PIN
PLUG
2 3
1 4
(4) Electric Guitar
4PIN
PLUG
2 3 1 4
AUDIO
SHIELD
1
4
3
2
PIN
(5) Line-in (Impedance 8K ATT. 10dB) Ω