Dataman 448Pro - Manual (Page 24)

Step by step instruction
1. Connect programmer to PC and outlet. Turn programmer on.
2. Run the control program: double click on
3. Search for connected programmer: <Ctrl+F> or Programmer / Search for
programmer.
In combo box “Multiprogramming system” select Dataman-448Pro and
click on “Search” button. After end of successful search click on “Accept”
button to finish Search of programmer.
4. Load project: click on or File / Load project
5. Click on “Connect programmers” button to connect programming modules
to Multiprogramming Control panel.
6. Select action with device: click on . If
desired action is selected, click on “Run” button. Desired action with devices
on all sites will be start. On “Status window” you may see current states of
action with devices on all sites. After end of action with device on “Status
window” will be displayed “Please, insert a new device into socket” for
appropriate site. After insertion of a new device into socket, desired action
with device will be start automatically.
24