Power and wiring, Operation, Whites setting – ILUMINARC Ilumiline™ Inground Tri-12 IP User Manual
Page 20: Reset to factory settings, Reset
Advertising
Operation
16
Ilumiline Inground IP Optic 25 Series User Manual Rev. 10
Whites Setting
(Ilumiline Inground Tri 12 IP Optic 25 RGB, only)
1. Go to CALIB.
2. Select a white color (WHITE 1~11) or RGB TO W.
3. Select an RGB color (RED, GREN, or BLUE).
4. Configure the color value (0~255).
5. Repeat steps 3 and 4 for the other RGB colors to obtain a white color.
6. Repeat steps 2 to 5 for the other white colors.
Reset
to Factory Settings
1. Go to SETTINGS > RESET.
2. Select an option (YES/NO).
Advertising