Transystem i-Blue 821 - Manual (Page 12)

12
Step 2 Turning on the power / perform LOG
Power off (Before) Power on (After) Data record
Power Button
Power
On
To turn on the power, please click and hold for 3 second, then
you can see the blue LED and orange LED turning on.
LOG
Enable To enable LOG mode, please click the Log Button, then you can
see the blue Log status LED blinking. Enable log mode,
navigation function is supported as well.
Log
Disable To disable LOG mode, please click the Log Button again, then
you won’t see the blue Log status LED blinking.
Power
Off To turn off the power, please click and hold for 3 seconds, then
you can see the blue LED and red LED blinking 3 times.
Difference between LOG disable and LOG enable:
LOG
disable
You can use the iBT-GPS as a Bluetooth GPS receiver to
navigate when you have a Bluetooth enabled PDA/
Smartphone in your car. But the logging is off.
LOG In this mode iBT-GPS works as a logger, navigation function is