Replacement of battery, Precautions – Directed Electronics OHD1502 User Manual
Page 13
© 2004 Directed Electronics, Inc
Replacement of battery
NOTE
: Before using remote after installation, remove the battery plastic protective slip.
1
2
1. Move the small latch to the right and slide out the battery holder.
2. Remove old battery and replace it with a new battery (CR2025) with the positive “+” sign facing as
shown above.
3. Push battery holder back into its compartment until it is locked.
Precautions
1. Properly dispose of used battery.
2. Do not misuse battery by shorting the positive “+” and negative “-” terminal or put it into fire.
Overheating may cause the battery to explode and cause a fire hazard.
3. If the remote is not to be used for a long period, remove the battery from the remote to prevent
damage from battery leakage.
4. To avoid accidents, prevent children from playing with the battery.
8