Q-See QSC13212D User Manual
Page 3
Notes
1. Avoid strong impact and stay away from strong electromagnetic interference and
vibration.
2. There are some sophisticated parts inside the camera, therefore, during
transportation and installation, please avoid damage caused by stress or severe
vibration. For the sake of safety, please do not switch on power before completing all
installation.
3. Please comply with all electrical safety standards during operation, camera or
signal transmission cable should maintain a sufficient distance (50 meters, 165 feet)
from high-voltage equipment or cables, precautions should also be taken to avoid
lightening.
4. Please install the camera in well-ventilated environment.
5. Please do not position the camera facing direct sunlight or other strong light source;
this could damage the lens and sensor.
6. The temperature range for the cameras are -20 ~ 50
°C (-4 to 122°F)
7. To avoid lightning strikes, please make sure the power supply ground line is in
good condition.