Clipcomm BS-H100 - Manual (Page 11)

[Disconnecting]
Press and hold down button for 3 seconds. The LED
indicator will flash three times rapidly and the connection
between BS-H100 and the headset will be discontinued.
The LED indicator will blink slowly while it is disconnected.
9
How to use
In case BS-H100 is connected with a Bluetooth
headset unintentionally and you disconnect the
headset using BS-H100, it will not be connected
with the headset which is disconnected within the
last one minute.
You can reconnect BS-H100 and the headset after
you disconnect them by letting the Bluetooth
headset connect with BS-H100.