Compuprint MDP40B - Manual (Page 23)

19
EJECT Ejects the inserted form.
This key is active, when the printer is offline or when the printer is online and no print
data are in the buffer.
When pressed while powering the printer on, the hexadecimal printing is selected.
When using an Olivetti protocol, this key is enabled only, when the printer is offline.
PROGRAM Selects one of the available configurations P1 and P2 if the PROGRAM LOCKED parameter
is not enabled.
This key is active, when the printer is offline or when the printer is online and no print
data are in the buffer.
When pressed while powering the printer on, selects the offset adjustment page. See
“
Offset Adjustments ” later in this manual.
ON LINE Toggles the printer between online and offline status.
When pressed while powering the printer on, selects the Self Test printout. See
“
Printing a Test Page ” in this manual.
STATION1
STATION2 When using the IBM 4722, IBM 9068 and the Olivetti protocols in two operators
(“booking”) mode, the application software determines the function of these keys.
When using the other protocols, these keys are disabled.