Dataprobe K-AB-T50 - Manual (Page 4)

Model KAB-T50 Page 4
SPECIFICATIONS
Switch Interface
50 pin Telco (Champ) connectors Common = Male, A and B Ports = Female.
48 / 50 leads switched, Strap Selectable.
Indicators
Two Red LEDs indicate Switch status A or B. LED's are driven by relays.
Relays
Standard Coil relays. Power off condition relaxes relays to Position A.
Gold clad Relay contacts rated for low level signals & up to 2A @ 30 VDC.
Stand Alone Enclosure
Height....2.75" Width.....8.00"
Depth.....6.25" Weight....1.20 lbs
Power Source; UL Approved Wall Mounted Power Supply. 115VAC 60 Hz External Control and Status
Interface; 9 pin D Subminiature, Female
Rack Mounted Card Nest
Standard 19" equipment Cabinet Mount, 8.75" high. Model K-AB-R-12 Accepts up to 6 K-AB-T50-R
cards. Includes power supply for 115VAC 60Hz. External Relay Controls and Status Contacts Via Two
50 Pin Telco Connectors, Female
Control Circuits
EIA RS-232/V.35, Internal or External: Standard EIA RS-232C Receiver
LOW = -30 VDC to +1.75 VDC HIGH = +1.75 VDC to +30 VDC Maximum Input ±30 VDC
TTL, External: LOW = 0.8 VDC HIGH = 2.0 VDC Maximum Input +5.5 VDC