Preferences / audio settings, Virtual surround, Digital output 1 – Daewoo DH-6100P User Manual

Page 26: Dynamic range

Advertising
background image

SETUP

25

Bitstream

Select when connected to a Dolby Digital or DTS
decoder (or an amplifier or other equipment with a
Dolby Digital or DTS decoder).

Virtual Surround

You can enjoy a simulated 3D effect from two
speakers by setting Virtual Surround to On.
Follow the same procedure as ‘Digital Output‘ to set
the ‘Virtual Surround’ option.

Audio

Digital Output

Bitstream

Dynamic Range

Off

Virtual Surround

Off

Instructions:

Enter-Confirm Setup-Exit Move …†

Select Virtual
Surround

Off

On

Follow the same procedure as ‘Video’ Settings to
select ‘Audio’ Settings.

Digital Output
1

Use […/†] to select ‘Digital Output‘ while the
‘Audio’ submenu is displayed.

2

Press [ENTER] or [√] to go to the second level.

3

Use […/†] to select the desired digital output
type.

4

Press [ENTER] to confirm your selection.

5

Press [SETUP] to exit the menu.

Off

No signal will be output from the Digital Audio Out
jacks.

LPCM

Select when connected to a 2 channel digital stereo
amplifier. The HDD/DVD Recorder's digital audio
signal will be output in the PCM 2ch format when
you play a DVD (or HDD) recorded with a Dolby
Digital (only for DVD) or MPEG soundtrack. If the
DVD is recorded with a DTS sound track then no
sound will be heard.

Setup menu

Audio

Digital Output

Bitstream

Dynamic Range

Off

Virtual Surround

Off

Instructions:

Enter-Confirm Setup-Exit Move …†

Select Digital
Output

Off

Bitstream

LPCM

PREFERENCES / Audio Settings

Preferences

Video
Audio
Parental Controls
Auto Settings
Hard Disk

Instructions:

Enter-Confirm Setup-Exit
Move …†

Dynamic Range

While watching DVD movies, you may wish to
compress the dynamic range of the audio output
(the difference between the loudest and quietest
passages). This allows you to listen to a movie at a
lower volume without losing clarity of sound. Set
‘Dynamic Range‘ to Low or High for this effect.
Follow the same procedure as ‘Digital Output‘ to set
the ‘Dynamic Range’.

Audio

Digital Output

Bitstream

Dynamic Range

Off

Virtual Surround

Off

Instructions:

Enter-Confirm Setup-Exit Move …†

Select Dynamic
Range

Off

Low

High

DG-M22-12D1P-XA(GB) 2005.12.22 8:4 AM ˘

` 25 mac001 1200DPI 100LPI

Advertising
This manual is related to the following products: