Dakota Digital Led Tail Lights LAT-NR112 - Manual

MAN#650245
INSTALLATION INSTRUCTIONS
LAT-NR112
LED Tail Lights for 1966 GTO
MAN#650245
Kit Includes:
Installation:
1. Remove the original bulb connectors from the bottom side of the housing.
2. Remove the plastic housing from the vehicle.
3. Remove the tail light lens by gently prying the housing away from the lens tabs.
4. Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is
recommended.
5. Remove the round mounting plate from the bottom of the LED assembly. It is attached with
two lock nuts. Make sure the wire harness is through the center large hole.