DeLonghi DMFPSII - Manual (Page 33)

REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is switched off before replacing the lamp
to avoid the possibility of electric shock.
■ Let the oven cavity and the heating elements to cool down;
■ Switch off the electrical supply;
■ Unscrew the protective cover (fig. 30);
■ Unscrew and replace the bulb with a new one suitable for high tempera-
tures (300°C) having the following specifications:
230-240V 50 Hz, 15W (for DMFPSII model 25W), E14
■ Refit the protective cover
NOTE: Oven bulb replacement is not covered by your guarantee
1
2
Advice for use and maintenance of catalytic panels
(models with catalytic panels)
The catalytic panels are covered with special microporous enamel which absorbs
and does away with oil and fat splashes during normal baking over 200°C. If,
after cooking very fatty foods, the panels remain dirty, operate the oven “idling” on
max temperature for about 30 minutes. These panels do not require to be
cleaned, however it is advised to periodically remove them from the oven (at least
the side panels) and to wash them with tepid soapy water and then wipe off with
a soft cloth.
DO NOT CLEAN OR WASH THEM WITH ABRASIVE PRODUCTS OR WITH
PRODUCTS CONTAINING ACIDS OR ALKALIS.
The side panels are reversible and when the catalytic microporous enamel
degrades, they can be turned to the other side.
Figure 30
33