D-Link DNS-33 - Manual (Page 23)

3 D-Link DNS-33 User Manual
Section 3 - Configuration
LAN
The Local Area Network settings for the DNS-323 are configured on the LAN page.
Link Speed
DHCP Client
Static IP
The LAN Link Speed is set to Auto
by default, but can be manually set
to 100Mbps or 1000Mbps.
Selecting DHCP Client will cause
the DNS-323 to obtain an IP address
from the local DHCP server.
Selecting Static IP requires you to
assign the IP information for the
DNS-323 manually.
Click the Enable radio button next
to Status to enable jumbo frames.
Select an MTU rate that your
network can support and then click
Apply to activate the new setting.
Jumbo Frame
Settings
MTU