Jp7: case open setting, Jp8: compactflash master/slave selection, Jumper setting function – IBASE MB500 User Manual
Page 14: Short/closed case open, Short/closed slave, Pin 1-2 short/closed, Atx mode (default), Pin 2-3 short/closed, At mode
Advertising
INSTALLATIONS
JP7: Case Open Setting
Jumper
Setting
Function
Short/Closed
Case open
Open Case
closed
JP8: CompactFlash Master/Slave Selection
Jumper
Setting
Function
Short/Closed
Slave
Open Master
JP9: ATX/AT Mode Select
Remarks: This jumper is supported only on board version 1.1 and
above.
Jumper
Setting
Function
Pin 1-2
Short/Closed
ATX Mode (default)
Pin 2-3
Short/Closed
AT Mode
10
MB500 User’s Manual
Advertising
This manual is related to the following products: