IBASE FWA6304-D25 - Manual (Page 11)

FWA6304-D25 Series User’s Manual 10
J11: DC Power Jack (+12V only)
Note: Do not connect J9 and J11 at the same time.
LED1, LED2, LED3 & LED4: LAN Port Link, Active LEDs
LED5: Power, Alarm & Status LEDs
Signal Name Pin # Pin # Signal Name
PWR LED+ A1 C1 PWR LED-
ALARM LED+ A2 C2 SIO GPIO55
STATUS LED+ A3 C3 SIO GPIO56
SW3: Software Reset Button
Signal Name Pin # Pin # Signal Name
GND 1 2 PCH GPIO7
Note: SW3 is controlled by GPIO only.
SW2: Power Switch
JP3: Mini-PCI Connector