IDK OPF-H1000D - Manual (Page 34)

OPF-TH1000D/OPF-RH1000D User’s Guide
34
7.3 Verifying operation (Maintenance menu)
You can set the required items for operation verification.
Set [F99] to “ALL” or “on” in order to enable the maintenance menu.
【See 7.2.14 [F99] Maintenance/status display menu】
7.3.1 [C06] HDCP input setting
You can set whether the transmitter encrypts HDCP to the source device.
Some source devices check whether the connected device supports HDCP and then determine whether they
encrypt HDCP signals or not. Since the transmitter is HDCP compliant, if it is connected to a sink device that
is not HDCP compliant, the sink device may not display video. In this case, set this menu to “oFF” in order to
display the video.
RS -232 C
FG
DC 5 V 3 A
L AUDIO OUTPUT
R
POWER STATUS HDCP
HDMI INPUT
Tx
OPTICAL DAISYCHAIN Tx for HDMI OPF-TH1000D RX
OPTICAL TX
CLASS 1 LASER PRODUCT クラス 1 レーザ製品
KEY LOCK － ＋ SET
SIGNAL
RS -232 C
FG
DC 5 V 3 A
POWER STATUS HDCP
HDMI OUTPUT
Rx
OPTICAL DAISYCHAIN Rx for HDMI OPF-RH1000D RX
OPTICAL TX
SIGNAL
DIP SW
CLASS 1 LASER PRODUCT クラス 1 レーザ製品
RS -232 C
FG
DC 5 V 3 A
L AUDIO OUTPUT
R
POWER STATUS HDCP
HDMI INPUT
Tx
OPTICAL DAISYCHAIN Tx for HDMI OPF-TH1000D RX
OPTICAL TX
CLASS 1 LASER PRODUCT クラス 1 レーザ製品
KEY LOCK － ＋ SET
SIGNAL
RS -232 C
FG
DC 5 V 3 A
POWER STATUS HDCP
HDMI OUTPUT
Rx
OPTICAL DAISYCHAIN Rx for HDMI OPF-RH1000D RX
OPTICAL TX
SIGNAL
DIP SW
CLASS 1 LASER PRODUCT クラス 1 レーザ製品
HDCP-
compliant
PC
Without
copyright
protection
With copyright
protection
HDCP input
setting: on
Video cannot be
displayed
Video can be displayed
HDCP-non-compliant
sink device
HDCP-compliant/non-
compliant sink device
HDCP-compliant sink
device
Transmitter Receiver
Receiver
HDCP input
setting: oFF
Video can be displayed
Transmitter
HDCP and sink devices
Setting value
on: HDCP enabled [Default]
oFF: HDCP disabled
Note: Set this menu to “on” in order to display copyright protected contents.