Cleaning, care & maintenance, Cooktops, Trivets – ilve Built-in Oven User Manual

Page 26: Burner caps, Brass burners, Aluminium skirts, Stainless steel, Tepanyaki plate, Ceran cooktops, Oven light replacement

Advertising
background image

Cooktops

clean the stainless steel cooktop

surface after each use with a clean

cloth and normal detergent. Make

sure the detergent does not contain

chloride or any chloride compound. For

persistent stains use warm vinegar or a

non-abrasive cleaner.

To make cleaning easier always

wipe spills when they occur, do not

leave them to dry as this makes

cleaning harder.

Trivets

Trivets should only be cleaned once

they have cooled, to stop grazing from

occurring. To clean trivets wash in

sink with warm soapy water then dry

immediately using a clean dry cloth.

do not use anything too abrasive such

as a chrome detergent as this may

cause damage.

The alkaline of dishwashing detergents

could damage the trivets. If you choose

to wash the trivets in the dishwasher

we recommend you use a hot rinse

mode with no detergent.

Enameled trivets may over a period of

time discolour, this is due to exposure

to a naked flame which may burn the

enamel edge off the tips of trivets.

This will not affect the performance of

the cooktop.

To remove surface staining use any

cooking oil and a fine brush or scourer,

lightly oiling trivets will also help in

keeping their new appearance.

Burner caps

The burner caps sit on the brass

burners. To clean, remove and wash

in warm water. Burner caps should

not be put into cold water immediately

after use, as grazing will occur, always

allow caps to cool before cleaning.

ILVE recommends you remove the

burner caps when cooking to increase

longevity as they are only cosmetic.

Brass burners

The brass burners will tarnish to a

brown colour with use. To clean simply

scrub with Quickleen S (Available

online, see page 23) or soak in white

vinegar for two hours to remove food

splatter.

Aluminium skirts

The aluminium skirt from the base of

the burner may be washed in warm

soapy water using a gentle scouring

pad to remove any burnt on food

splatter. A commercial product such as

Autosol, which is designed for cleaning

aluminium, can be used following

makers’ instructions. do not put skirts

in the dishwasher as this may cause

the aluminium to discolour. You can

also use Quickleen S (available at all

ILVE Showrooms or shop.ilve.com.au).

Stainless steel

Stainless steel can be cleaned using

the ILVE cleaning cloth available from

ILVE or a range of commercial products

and stainless steel cleaners. Follow

makers’ instructions, taking care when

cleaning around the graphics. When

cleaning, be sure to follow the grain of

the stainless steel as much as possible.

never use abrasive products on the

stainless steel as it will scratch the

stainless steel.

Tepanyaki plate

Allow the tepanyaki plate to cool

slightly and pour on white vinegar.

Allow to sit for five minutes then

scrape the plate with a flat spatula.

For heavy build up a scourer may be

required. Quickleen S is recommended

as a great cleaning solution (Available

online, see page 23).

Ceran cooktops

The flat surface of the ceran makes

it easy to maintain. All cleaning must

occur when the cooktop is cold. When

cold use a soft damp cloth to wipe

over the cooktop and then dry gently.

For a more precise clean a specialty

cleaning product may be purchased

from an outlet, never use abrasive

products.

Take care not to drop substances

containing sugar on the hob, if this

does happen clean with warm water

immediately before the glass cools.

Oven light replacement

replacement globes are available from

the ILVE service department. When

changing over the lamp always switch

off the power first. unscrew the glass

cover over the globe by twisting it

anticlockwise. If glass cover is hard

to unscrew, heat oven slightly, as

this will heat any fat that might be

congealed around the glass, and

unscrew using a cloth.

remove existing globe and fit new

bulb, refit the glass cover and switch

on the power.

nOTE: The light may be difficult to

remove over time. Try using Multi-grips

being sure nOT to break the bulb.

Rangehoods

rangehood filters need to be washed

regularly by using warm soapy water

and drying using a soft dry cloth.

There are various commercial products

available, which also may be used,

following manufacturers’ directions

for use.

cleaning filters in the dishwasher

The heavy alkaline of dishwashing

detergents could damage filters. If

you choose to wash the filters in the

dishwasher we recommend you use a

hot rinse mode with no detergent.

Quickleen r is recommended as a

great cleaning solution (Available

online, see page 23).

cleaning, care & maintenance

Buil

t-in Ovens

26

ILVE Operating Manual

Advertising