Johnson Amplification J-STATION - Manual (Page 20)

Storing/Copying a Preset
After a Preset has been edited to your liking, the changes must be stored to a User Preset if the J-Station is
to remember your modification. Selecting a new Preset, or turning the J-Station off before performing the
Store function will cause the modifications that you had made to be lost.The Store button is used to save
any modifications that you had made to a Preset, or to copy a Preset to a different location. The following
steps outline the procedure for Storing or copying a Preset:
1. Press the Store button once.The Display will begin to flash the Preset number indicating that you can
select a new Preset location.
2. Rotate the Data knob to select the Preset location where changes will be saved.
3. Press the Store button again to complete the Store function.
To copy a Preset to a new location, select the Preset you wish to copy and then follow steps 1 through 3.