La Crosse Technology BC-1000U - Manual (Page 39)

38
3.
―Charge‖ will be displayed in the LCD as Charge mode is the default mode.
4. Within 8 seconds after inserting the batteries, select the charging current at 1500 or 1800
mA by pressing the CURRENT key.
5. 8 seconds after the last key press, the display will blink once to indicate that the time allowed
for setting is over and the charging will start:
Charging current can be set at 1500
or 1800mA when only two batteries
are charged at compartment 1 and 4.
This display will blink once and
charging starts