LD Systems WS 1000 G2 - Manual (Page 14)

14
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ESP
AÑOL
POLSKI
IT
ALIANO
STANDARD DISPLAY
The standard display shows the preselected frequency and volume.
VOLUME
Use the Up and Down buttons to set the desired volume (00 - 63).
GROUP
Push the SET button and hold it for 1 second. GROUP and digit below blink. Push the Up and Down buttons to set
the desired group (1 - 08). Press SET again to confirm.
The display will return to standard after a short period of time of non-activity automatically.
Note: Each of the groups 1 - 08 consists of 12 channels, each corresponding to a specific frequency.
CHANNEL
Push the SET button, hold it for 1 second and press SET again. CHANNEL and 2 digits below blink. Push the Up
and Down buttons to set the desired channel (01 - 12). Press SET again to confirm.
The display will return to standard after a short period of time of non-activity automatically.
Once a specific frequency (group and channel) has been selected, the transmitter (handheld or bodypack) has to
be synchronized to the same frequency (group and channel) via the ASC function.
SYSTEM SETTINGS: