LD Systems WS 1G8 - Manual (Page 10)

10
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ES
pA
ño
L
po
LSKI
IT
ALIAN
o
BODYPACk TRANSMITTER:
1 ON / Off AND MUTE SwITCH
Push and hold for 2 seconds to switch transmitter
on or off.
Press briefly to activate mute function. Press
again briefly to deactivate mute function.
2 BACkLIT LCD
Displays group, channel and a 3 segment battery
status indicator. If the battery symbol and the
green ASC LED blink, the batteries need to be
replaced immediately. Note: Backlight will turn off
automatically after a brief moment.
3 ANTENNA
4 ASC LED
Green LED lights up continuously if power is
switched on.
Green LED blinks during frequency synchronisation.
Green LED blinks when batteries are low.
5 MUTE LED
Lights up red when mute function is activated.
6 BATTERY COMPARTMENT
To replace batteries slightly press on marked po-
sitions on left and right side of the cover and open
forward. Remove batteries, insert 2 new AA size
batteries (direction as shown in the compartment)
and close the cover.
7 IR INfRARED INTERfACE
For frequency synchronisation open cover and
push the ASC button on the receiver (the ASC
symbol in the display blinks) and hold the (swit-
ched on) transmitter with its infrared interface fa-
cing direct to the infrared interface of the receiver
in a distance between 5 and 20 cm. 8 SELECT
Manual setting of group and channel.
Open cover, press and hold button until only group
number appears. Release button. Group number
blinks. Now press button briefly to change value
step by step until desired group appears. Carry out
the same procedure to change channel number.
The display will return to standard after a short
period of time of non-activity automatically.
4
5
2
3
1
6
7 8