Leprecon W-DMX G4 MK I - Manual (Page 15)

6 BlackBox and WhiteBox F-2
28 W-DMX G4(S) User Manual, edition 2 2013-10
Fig. 8: Connectors and ports of the BlackBox F-2
Hint
On BlackBox F-2 MK I, the Universe 2 output is only
available via RJ 45 ports.
No. Port Description
1 AC power input U
AC
= 90–250 V / 50–440 Hz
MK I: IEC 2.5A connector
MK II: PowerCon 20A connector
2 Reserved –
3 Ethernet RJ 45 port (MK II: EtherCon RJ 45 port)
4 DMX OUT / bypass XLR female 5 pin output for Universe 1
5 DMX IN XLR male 5 pin input for Universe 1
6 DMX IN / OUT
standard for
Universe 2
RJ 45 port:
1: Universe 2+
5: –
2: Universe 2– 6: Universe 1–
3: Universe 1+ 7: Universe 2 GND
4: – 8: Universe 1 GND
7 DMX IN / OUT
standard for
Universe 1
RJ 45 port:
1: Universe 1+
5: –
2: Universe 1– 6: Universe 2–
3: Universe 2+ 7: Universe 1 GND
4: – 8: Universe 2 GND
6 BlackBox and WhiteBox F-2
2013-10 W-DMX G4(S) User Manual, edition 2 29
No. Port Description
8 DC power input Input for Phoenix gold connector:
• Left: Ground
• Right: +12 V DC
9 DMX OUT / bypass XLR female 5 pin output for Universe 2
10 DMX IN XLR male 5 pin input for Universe 2
6.2.2 WhiteBox F-2 MK I
Fig. 9: Connectors and ports of the WhiteBox F-2 MK I
To ensure safe transmission of signals for outdoor use, the WhiteBox does not
have XLR connectors. For this reason the connection to DMX signal cables
differs slightly to the BlackBox models, which are for indoor use only.
No. Port Description
1 Cord Strip For AC power input (2)
2 AC power input U
AC
= 90–250 V / 50–440 Hz
• Left: Outer conductor (L)
• Middle: Ground (GND)
• Right: Neutral conductor (N)
3 Cord Strip For DC power input (4)
4 DC power input Phoenix gold connector 12 V DC
• Left: Ground
• Right: +12 V DC
5 Cord Strip For signal cable (DMX or Ethernet)
2014-03 W-DMX G4(S) User Manual, edition 3 2014-03 W-DMX G4(S) User Manual, edition 3