Leprecon Litescape dimmer - Manual (Page 7)

Litescape User’s Manual Page 5
O
VERVIEW
Purpose Of The Litescape™ Architectural System
The Litescape™ Architectural Series Houselite System is designed to meet the lighting needs of
architectural installations; such as houses of worship, theatres, corporate and municipal buildings and
schools. Litescape™ wall panels allow designers to create “looks” that are recalled by the touch of a
button.
Components of a Litescape System
A Litescape System can consist of the following components:
• Incandescent Fixtures
• One or more LWD-2400 Litescape™ Dimmers
• DMX control console
•
One or more Houselite wall panels to provide additional control points for lights
Individual fixtures are wired to a wall-mounted LWD-2400 Dimmer. Houselite wall panels must be
connected to an LWD-2400 Dimmer with Category 5 cable, and can be mounted in any room to which the
cabling has been run from the LWD-2400.
The LWD-2400 Litescape™ Dimmer can be used alone to control a system of architectural lights, or in
combination with Houselite wall panels. Wall panels add the convenience of additional control points in
remote rooms or at several points within one large room. Architectural lighting can be pre-programmed
using the LWD-2400 Dimmer menu system, or can be controlled with input from a DMX controller
connected to the LWD-2400 Dimmer.
= light
= LWD-2400
= w all panel
Foyer Seating Front Utility
LWD-2400
In the simple example above, an LWD-2400 Dimmer located in a utility area controls lights in a foyer,
main seating area and front “stage” area. Wall panels located behind the front stage area, at the rear right
and left of the seating area, and in the foyer allow push-button and/or slider control of lights in their areas.